CPU and memory utilization
The CPU utilization feature provides data for CPU and memory utilization. You can view CPU
utilization information for the past 10 seconds (s), 1 minute (min), 10 min, 1 hour (hr), 24 hr, or since
system startup. The switch displays CPU utilization as a percentage. With CPU utilization
information you can see how the CPU was used during a specific time interval.
The memory utilization feature provides information about the percentage of the dynamic memory
currently used by the system. The switch displays memory utilization in terms of the lowest
percentage of dynamic memory available since system startup.
For more information about CPU and memory utilization, see
Configuring System Monitoring on
Avaya Virtual Services Platform 7000 Series
, NN47202–505.
Show commands
You can use ACLI
show
commands to display valuable feature configuration information. The
show
tech
command displays detailed information incorporated from several individual
show
commands,
including but not limited to the following:
•
show mac-address-table
•
show lacp aggr
•
show lacp port
•
show ipv address
•
show ipv interface
•
show system verbose
•
show ipv6
•
show mlt
•
show vlan
•
show spanning-tree
•
show interface
•
show log
MLT or DMLT
Enable a MultiLink Trunk (MLT) or a Distributed MultiLink Trunking (DMLT) to help you detect
connectivity issues. You can use the following ACLI commands to manage an MLT or DMLT:
• Use the
show mlt
command to verify the status of an MLT or DMLT.
Troubleshooting tools
22
Troubleshooting Avaya VSP 7000 Series
July 2015
