Avaya Media Gateway G250, Руководство администратора

Страница: 57 / 840

Managing login permissions
Issue 5 June 2008 57
Note:
Note:
You can also upload the authentication file from the gateway for troubleshooting.
To upload the authentication file, use
copy auth-file ftp
to upload it to an
FTP server,
copy auth-file scp
to upload it to an SCP server,
copy
auth-file tftp
to upload it to a TFTP server, or
copy auth-file USB
to
upload it to a USB mass storage device. To display the upload status, use
show
upload auth-file status
.
Configuring ASG authentication
You can perform the following ASG configurations:
●
Block Avaya Services login access, using
no login authentication
services-logins
. This deactivates all Avaya Services logins, including local craft
password-based authenticated login. To reactivate, use
login authentication
services-logins
.
●
Set the time the gateway waits for user response to authentication requests before timing
out a connection, using
login authentication response-time time
, where
time
is the time, in seconds, after which the gateway aborts the connection if no response is
received.
For example, to timeout connections if no response arrives within 180 seconds after an
authentication request:
Use
no login authentication response-time
to return the response time value
to the factory default of 120 seconds. The time value you enter is used for both:
●
The response time interval between the username prompt and the username entry
●
The response time interval between the challenge prompt and the challenge response
●
Deactivate password authentication and activate ASG authentication of Avaya Services
local connections to the Console port. To do this, use
no login authentication
local-craft-password
. To enable password authentication of Avaya Services local
connections to the Console port, use
login authentication
local-craft-password
(default).
G350-001(super)# login authentication response-time 180