manualshive.com logo in svg

Avaya Media Gateway G250, Руководство администратора, Страница: 141 / 840

Поделиться
Скачать
Avaya Media Gateway G250 Скачать руководство пользователя страница 141

Issue 5 June 2008

141

 

Transferring a call on DCP and IP phones

1. While talking on a call or while you have a call on Hold, press the Transfer button on your 

phone.

You hear a dial tone; the other party hears nothing.

2. Dial the third party’s number on your phone.

3. You can either:

●

Wait for the third party to answer and announce the call, then either press the Transfer 
button again or hang up.

●

Transfer the call before the third party answers by pressing the Transfer button again.

The person you were talking to is transferred to the third party.
A message appears on your phone display to indicate that the call transfer is complete.

Note:

Note:

If you do not completely dial the string or if you hear a fast-busy or re-order 
(French siren) tone, only a Hard Hold call connection (if present) remains at the 
station.

If the third party does not answer, the call does not ring back to the originating party. If a 
transfer does not complete, the event is logged.

Transferring an established call from an analog phone

Newer analog phones (for example, Avaya 62xx series) have buttons with specific functions for 
transferring a call. The switchhook (receiver on/off hook) sends a disconnect signal to the 
server, and the Transfer/Flash button sends a transfer message to the server.

1. While on a call, press the switchhook once or press the Transfer/Flash button.

You hear a dial tone; the other party will hear nothing.

2. Dial the third party’s number on your phone.

3. You can either:

●

Wait for the third party to answer and announce the call, then hang up.

●

Transfer the call before the third party answers by hanging up.

The person you were talking to is transferred to the third party.

A message appears on your phone display to indicate that the call transfer is complete. If 
the necessary call processing resources are not available, the transfer does not complete 
and the event is logged.

Note:

Note:

Displays are not supported on analog phones unless they are supported locally 
by an analog phone.

Содержание Media Gateway G250









































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов