Avaya Media Gateway G250, Руководство администратора

Страница: 201 / 840

Configuring SLS
Issue 5 June 2008 201
set interface-companding Set the interface to agree with the
companding method used by the
far-end of the DS1 circuit for SLS
mode
set layer1-stable Determine whether or not to keep
the physical layer active (stable)
between calls in SLS
set name Identify the user name for an ISDN
facility in SLS
set side Specify the glare-handling conditions
when the
set interface command
has been administered as
peerMaster or peerSlave for the
ISDN link in SLS
set spid-a Assign a Service Profile Identifier
(SPID) to the B1 channel of the BRI
link in SLS
set spid-b Assign a Service Profile Identifier
(SPID) to the B2 channel of the BRI
link in SLS
set tei-assignment Select the method by which the
Layer 2 (LAPD) protocol obtains its
Terminal Endpoint Identification
(TEI) address in SLS
show List all BRI SLS parameters for this
BRI port
clear attendant Delete the administered attendant
provisioning in SLS
clear bri Delete the administration for a given
BRI channel in SLS
clear dial-pattern Delete a single dialed string pattern
entry in the SLS data set
clear ds1 Delete the administration for a
specific DS1 channel in SLS
clear extension Delete a particular extension number
in the SLS data set.
Note: It is preferable to use the
clear station
command.
clear fac Delete an administered Feature
Access Code for SLS
Table 58: SLS CLI command hierarchy (continued)
Root Level
Commands First Level Context
Commands Second Level Context
Commands Description
2 of 9