Avaya Media Gateway G250, Руководство администратора, Страница: 388 / 840

Configuring advanced switching
388 Administration for the Avaya G250 and Avaya G350 Media Gateways
Note:
Note:
If you configure the Ethernet LAN port on the G350 front panel to be redundant
with the Gigabit Ethernet port on the MM314 or MM316 Media Module, the
Ethernet LAN port becomes the primary port after resetting the G350 even if you
configured the Gigabit Ethernet port to be primary. To prevent this, use the
set
port redundancy-intervals
command with the switchback interval
parameter set to 0.
Port redundancy configuration examples
The following example creates a port redundancy pair:
The following example deletes a port redundancy pair:
The following example enables all configured port redundancies:
The following example disables all configured port redundancies:
The following example configures the switchback interval for all configured port redundancies:
The following example displays port redundancy information:
G350-001(super)# set port redundancy 6/3 6/5 on 1
Monitor: Port 6/5 is redundant to port 6/3.
Port redundancy is active - entry is effective immediately
G350-001(super)# set port redundancy 6/3 6/5 off
Entry Monitor removed: Port 6/5 is not redundant to port 6/3
G350-001(super)# set port redundancy enable
All redundancy schemes are now enabled
G350-001(super)# set port redundancy disable
All redundancy schemes are disabled but not removed
G350-001(super)# set port redundancy-intervals 60 30
Done!
G350-001(super)# show port redundancy
Redundancy Name Primary Port Secondary Port Status
----------------- -------------- ---------------- --------
Monitor 6/3 6/5 primary
Minimum Time between Switchovers: 60
Switchback interval: 30