Avaya G600, Инструкция по установке

Страница: 53 / 274

53 Migrating to an Avaya™ S8700 Media Server with Avaya™ MCC1 or SCC1 Media Gateway
Configure the SNMP Subagent in the Avaya Ethernet Switch (if used)
May 2003
4 Administer the terminal emulation port settings:
•
9600 baud
• No parity
•
8 data bits
• 1 stop bit
5
Follow the instructions in the Quick Start Guide
6 Set the following parameters:
•
IP address and subnet mask of the Ethernet switch(es)
• For Ethernet switch for CNA, the defaults are 198.152.254.240,
255.255.0.0.
• For Ethernet switch for CNB, the defaults are 198.152.255.240,
255.255.0.0.
• IP address of the trap receiver. (Do not use the Active Server IP address.)
•
For Ethernet switch for CNA, this is the IP address of media server 1.
(default is 198.152.254.200)
•
For Ethernet switch for CNB, this is the IP address of media server 2.
(default is 198.152.255.200)
•
SNMP community string for Get, Set, and Trap. (Refer to the chapter on SNMP
commands on the documentation CD that comes with the Avaya Ethernet switch.)
SECURITY ALERT
The Get and Set, community name strings are generally configured with default values of
Public and Private, respectively. These community name strings function as passwords for
their respective SNMP operation. It is always a good idea to change these community name
strings to something other than the default values. If a Network Management Station (NMS) is
in operation on the network, whatever these strings are changed to must be communicated to the
NMS administrator. If the defaults are left administered this could create a serious security
issue. For example, the default Set community name string, with it’s widely known value of
Private, could be used to reconfigure the Ethernet switch via SNMP message.
7 When completed, disconnect the services laptop computer from the Ethernet switch.
8
If two Ethernet switches are present for CNA, repeat steps 1 through 7 for the second
switch. Refer to the filled-out job aid titledPre-Installation Network Planning
Forms—S8700 Media Server for the proper addresses, masks, and community strings.