Avaya Communication Manager IP DECT, Руководство по установке, администрированию и обслуживанию

Страница: 51 / 128

Configuring the Avaya DECT Mobility Manager
Issue 1 August 2006 51
One IP DECT base station per cluster can be configured as master. The master is displayed in
bold font.
Each IP DECT base station is identified by its ethernet address (6 byte hex format, colon
separated). The ethernet address is unique and can be found on the back of the chassis.
For easier administration each IP DECT base station can be associated with a location string.
The location string can hold up to 20 characters.
New IP DECT base stations can be added to the system by pressing the ‘New’ button. A popup
window appears providing the configuration of a new IP DECT base station. Before a IP DECT
base station can be added the associated IP region has to be already configured.
Note:
Note:
Adding a new IP Trunk to the system requires an IP Region to be configured first.
The same popup window could be opened for an existing IP DECT base station by pressing the
tool icon
of the appropriate IP DECT base station.
An IP DECT base station could be deleted by pressing the trash can icon . A similar popup
window asks for confirmation showing the current configuration of this IP DECT base station.
DECT configuration
The DECT functionality for each IP DECT base station can be switched on / off. If DECT is
active the IP DECT base station can be added to a cluster and the master option can be set.
Since there is only one master per cluster allowed setting the master checkbox may remove this
option on another IP DECT base station in this cluster.