Avaya Communication Manager IP DECT, Руководство по установке, администрированию и обслуживанию

Страница: 52 / 128

Installation and Configuration
52 Avaya IP DECT Installation, Administration, and Maintenance
States of an IP DECT base station
For each IP DECT base station the state of the DECT subsystem is displayed. The states are:
●
Synchronous
The IP DECT base station is up and running. The IP DECT base station recognizes and is
recognized by other IP DECT base stations in its cluster through its air interface and
delivers a synchronous clock signal to the telephones.
●
Asynchronous but active
The IP DECT base station has not been able to synchronize to its neighbours yet. No DECT
communication is possible. But nevertheless the IP DECT base station has already been
able to connect to the ADMM. This phase should usually last only for a few seconds after
starting up the IP DECT base station or the ADMM. If this state lasts longer this is an
indication for a hardware or network failure.
●
Searching
The IP DECT base station has lost synchronisation to its neighbours. No DECT
communication is possible. This phase should usually last only for a few seconds after
starting up the IP DECT base station or the ADMM. If this state lasts longer or is re-entered
after being in a synchronous state this is an indication for a bad location of the IP DECT
base station.
●
Inactive
The IP DECT base station has connected to the ADMM but the air interface has not been
switched on yet. For any IP DECT base station with activated DECT functionality this phase
should last only for a few seconds after starting up the IP DECT base station. If this state
lasts longer this may indicate an hardware failure.