Avaya Communication Manager IP DECT, Руководство по установке, администрированию и обслуживанию

Страница: 86 / 128

Maintenance
86 Avaya IP DECT Installation, Administration, and Maintenance
5. Enter the phone number to call.
6. Press OK .
7. Enter a number of seconds between two calls.
8. Press OK .
9. Enter a number of seconds a call shall be active.
10. Press OK . The test will be started automatically.
To stop the test, switch the phone off and on again.
Avaya 3711 Auto Answer Test Mode
You can put the Avaya 3711 in the "auto answer test mode” with few keystrokes. In this mode
the phone will answer incoming calls automatically. You can use this feature together this
phones in the "auto call test mode” for test purposes. This mode is also active if the phone is an
the charger.
1. Short press the " Menu ” soft key
2. Enter the following key sequence: R***76#
3. Select Auto Answer
4. Press OK .
5. Enter a number of seconds the phone shall ring before it will answer the call.
6. Press OK .
7. Enter a number of seconds a call shall be active.
8. Press OK . The test will be started automatically.
To stop the test, switch the phone off and on again.