Avaya Communication Manager IP DECT, Руководство по установке, администрированию и обслуживанию

Страница: 46 / 128

Installation and Configuration
46 Avaya IP DECT Installation, Administration, and Maintenance
With the configure time zone mask the standard time and the daylight savings time (DST) of a
time zone can be changed. If the time zone has no DST only the UTC difference can be
configured. For the DST both points of time (begin of standard time and begin of daylight
savings time) have to be specified exactly. A certain day in the month or a certain week day in a
month can be used (see the following screen shots as an example).
SNMP
In order to manage a large network of IP DECT base stations offer a SNMP agent in each IP
DECT base station. This will give alarm information and allow a SNMP management system
(such as HP Open View) to manage this network.
All agents are configured in a central place. IP DECT base station dependent parameters like
sysLocation and sysName are generated. sysLocation corresponds to the location configured
via web service. If this location is not configured sysLocation is set to "Location”. sysName is
composed of MAC address and "IP DECT base station” or "ADMM IP DECT base station” if the
ADMM is running on this IP DECT base station.
How long an IP DECT base station is in operational state can be requested by reading
sysUpTime. This value indicates the running time of the IP DECT base station application
software. It does not indicate the running time of the operating system which does not
correspond to the operational IP DECT base station state. This value does not make a
statement about the DECT network.