Avaya Communication Manager IP DECT, Руководство по установке, администрированию и обслуживанию

Страница: 56 / 128

Installation and Configuration
56 Avaya IP DECT Installation, Administration, and Maintenance
The type of the phone will be automatically detected in case of the Avaya 3701 and Avaya 3711.
If the type of a phone can not be detected the type will be set to WT9620 automatically.
If the type (WT9620, 20DT, GAP) of the phone is configured before subscription and the type
can not be detected then the configured type will be used.
The Name and Authentication Code fields are optional settings. The Number is displayed in the
DECT Monitor program and the Name allows to identify its user. The Authentication Code is
used during initial subscription as a security option.
A similar popup window appears when configuring an existing telephone by pressing the tool
icon
. The only difference is the delete subscription checkbox. If this option is selected, the
telephone will be unsubscribed.
Note:
Note:
The Authentication Code can only be changed if the telephone is not subscribed.
The telephone Name can be changed, but this will not take effect until the
telephone is subscribed again.
Deleting of a telephone can be done by pressing the trash can icon . A popup window
appears and asks for confirmation.
After adding a telephone to the ADMM the telephone must be subscribed. This is done by
pressing the ‘Subscribe’ button. The ADMM will allow a subscription of configured but not
subscribed telephones during the next hour (how to subscribe the see
Registration of Avaya
3701 and Avaya 3711 on page 73).
During the subscription process the system wide PARK and the Authentication Code either
configured for the telephone or system wide must be entered in the telephone form fields. The
PARK is displayed at the telephone configuration page in the top right corner.