Avaya CallPilot 703t, Установка оборудования, Страница: 24 / 52

Installation checklist
Step Description Check
1 Review the "Installing the CallPilot server" section in the Installation and
Configuration Task List (NN44200-306), and complete stage 1 of the
"Installation checklist."
2 Unpack the server, and ensure you have all the items you need (see
Unpacking the 703t server on page 26).
Complete the following checklists that are provided in the Installation
and Configuration Task List (NN44200-306):
• "CallPilot software media and documentation checklist"
• "CallPilot server hardware checklist"
3 Remove the server cover, and inspect the interior (see pages
Removing the side cover on page 27 and Inspecting the server
interior on page 29).
4 Replace the server cover.
5 Place the 703t server in the chosen location (see Installing the server on
page 35).
6
Set the DIP switches on the modem (see To set the modem DIP
switches on page 37).
7 Connect the 703t server and devices as follows:
Connect the monitor, keyboard, and mouse (see To connect the
mouse, keyboard, and monitor to the server on page 40).
Connect the modem (see To connect the modem to the server on
page 41).
Connect the 703t server to the ELAN hub (see To connect the server
to the ELAN subnet (Meridian 1 or CS 1000 only) on page 42).
Important:
To comply with EMC requirements, a Class A hub must be located
10 m (33 ft.) away from the 703t server.
Note:
If you are connecting the optional Avaya server subnet, do not power
up unless your antivirus programs and Avaya security updates are
installed first.
Connect the 703t server to the CLAN hub (optional); (see Connecting
the server to the Avaya server subnet (optional) on page 43).
Preinstallation requirements
24 Avaya CallPilot® 703t Server Hardware Installation December 2010