Avaya CallPilot 703t, Установка оборудования, Страница: 29 / 52

6. Set the cover aside.
7. Continue with Inspecting the server interior on page 29.
Inspecting the server interior
Introduction
Before you install the server, you should perform a visual inspection for loose components,
foreign matter, or shipping damage inside the server.
Caution:
Risk of equipment damage
When working with interior components, use an ESD wrist strap to protect static-sensitive
components.
To inspect the server interior
1. Ensure that all the cards are fully seated on the baseboard.
2. Check for any loose wires or foreign objects, such as loose screws, inside the
chassis.
3. Review the slot locations (see Rear panel diagram on page 12).
4. Do one of the following:
IF THEN
you observe any damage contact your Avaya technical support
representative.
components have become loose secure them. Then replace the server
cover and proceed with the hardware
installation.
Refer to the procedures in
CallPilot
703t Server Maintenance and
Diagnostics
(NN44200-702).
you are satisfied that the 703t server
has arrived at your site undamaged replace the server cover.
Inspecting the server interior
Avaya CallPilot® 703t Server Hardware Installation December 2010 29