Avaya CallPilot 703t, Установка оборудования, Страница: 18 / 52

For information about the ELAN subnet's purpose and requirements, see the Planning
and Engineering Guide (NN44200-200).
• 10/100/1000Base-T Ethernet connectivity to the Avaya server subnet
The Avaya server subnet is an optional connection that provides data connectivity among
desktop and Web messaging clients, administrative PCs, and the CallPilot server.
See Rear panel diagram on page 12 to identify the location of network interface connectors.
Network requirements
Appropriate networking equipment must be available for the ELAN subnet and the optional
Avaya server subnet if it is used.
The ELAN subnet (and the optional Avaya server subnet if used) must be properly configured
for correct CallPilot operation. To ensure correct configuration, Avaya recommends that you
consult a network specialist.
Remote access connectivity
The RS-232 COM1 connector on the rear of the 703t server provides the connection to an
external dial-up modem. The modem allows administrators and technical support personnel
to administer the 703t server from a remote location.
pcAnywhere is used to establish a remote access connection to the server.
Supported peripheral devices
This section identifies external devices that are supported by the 703t server. The following
table describes the supported peripheral devices:
Device Description
Modem A 56 Kbps external modem (NTRH9078 in North America only)
provides remote access to the 703t server. The modem
connects to the RS-232 COM1 connector on the rear of the
server.
Because the modem is an external device, it requires its own
AC power source referenced to the same ground as the 703t
server and the switch to which it is connected.
703t server description
18 Avaya CallPilot® 703t Server Hardware Installation December 2010