Avaya CallPilot 703t, Установка оборудования, Страница: 43 / 52

raised floor, unless it can be confirmed that these spaces are not used to convey
environmental air.
What is next?
IF the server will THEN
be connected to a Avaya server subnet continue with Connecting the server to the Avaya
server subnet (optional) on page 43.
not be connected to a Avaya server
subnet continue with installing the software feature
dongle. See
Installing the Avaya software feature
dongle on page 44.
Connecting the server to the Avaya server subnet (optional)
This section provides instructions to connect the server to the Customer LAN (CLAN).
Note:
The Avaya server subnet connection is optional. However, connection to a Avaya server
subnet is required for support of desktop and Web messaging users, or administration by
means of a Web-enabled PC. Make sure that your latest antivirus programs and Avaya
security updates are installed.
Important:
To comply with EMC requirements, a Class A hub must be located 10 m (33 feet) away from
the 703t server.
To connect the server to the Avaya server subnet
1. Locate the CLAN connector on the back of the server.
Note:
The CLAN connector is labeled as NIC2 1GB. For the connector location, see
the diagram on Rear panel on page 39.
2. Connect an RJ-45 network cable from the CLAN hub to the CLAN connector.
What is next?
Avaya CallPilot® 703t Server Hardware Installation December 2010 43