Avaya CallPilot 202i, Руководство пользователя, Страница: 39 / 92

• Tracert determines the route by sending the first echo packet with a TTL of 1 and
incrementing the TTL by 1 on each subsequent transmission until the target responds, or
the maximum TTL is reached.
• Tracert then examines the ICMP Time Exceeded messages sent back by intermediate
routers.
Tracert syntax
tracert [-d] [-h maximum_hops] [-j host_list] [-w timeout]
[target_name]
Tracert parameters
The tracert command uses the following parameters.
Parameter Description
-d Specifies not to resolve addresses to hostnames.
-h maximum_hops Specifies the maximum number of hops to search for the target.
-j host-list Specifies a loose source route along the host list.
-w timeout Waits the number of milliseconds specified by the timeout for
each reply.
target_name The name of the target host.
To run the tracert command from the operating system
1. Click Start, Programs, Accessories, Command Prompt to display the command
prompt window.
The Command Prompt window appears.
2. At the prompt, type the following command:
tracert [-d] [-h maximum_hops] [j host_list] [-w timeout]
[target name]
Example: tracert 200.286.0.32 210 200.236.0.04
3. Press Enter.
The system runs the tracert utility.
4. Type Exit to exit the Command Prompt window.
Tracert syntax
Avaya CallPilot 202i Server Maintenance and Diagnostics December 2010 39