Avaya 4524GT, Руководство по настройке

Страница: 96 / 362

Prerequisites
Log on to the Privileged EXEC mode in ACLI.
Procedure steps
Enter the following command:
show usb-host-port [unit <1-8>]
Table 31: show usb-host-port parameters
Variable Description
unit <1-8> Specifies a specific switch unit within a stack. Values
range from 1 to 8.
Setting up a terminal
You can customize switch terminal settings to suit the preferences of a switch administrator.
You must perform this operation in the Command Line Interface.
The
terminal
command configures terminal settings. These settings include terminal length
and terminal width.
The syntax of the
terminal
command is:
terminal length <0-132> width <1-132>
Run the terminal command in User EXEC command mode. The following table describes the
for the terminal command.
Table 32: terminal parameters
Variable Description
length Set the length of the terminal display in lines; the
default is 23.
Important:
If you set the terminal length to 0, the pagination is
disabled and the display scrolls continuously.
width Set the width of the terminal display in characters; the
default is 79.
System configuration using ACLI
96 Configuration — System April 2011