Avaya 4524GT, Руководство по настройке

Страница: 90 / 362

show script status command
Use the
show script status
command to view the status of one or all the entries. The
syntax for the
show script status
command is:
show script status [<1-127>]
The
show script status
command is executed in the Privileged EXEC command
mode.
Note:
By default, a script table index is present as a bootp entry. If a bootp server is connected to
the stack or switch, you can automatically configure the switch using an ASCII file present
on the bootp server.
The following is an example output for
show script
command:
4526T-PWR(config)#show script 2
Table index: 2
Load script on boot: Yes
Boot priority: 1
Script source: bootp://
Table 25: show script status parameters
Parameters Description
<1-127> The index of the entry to be used.
script run command
Use the
script run
command to load the script from an ASCII file to a tftp server or USB
Mass Storage Device.
Important:
When you use the TFTP address parameter to perform copy or download commands, the
system overwrites the TFTP server address
The syntax for the
script run
command is:
script run { <1-127> | tftp <A.B.C.D> <filename> | usb [unit <1-8>
<filename>] }
System configuration using ACLI
90 Configuration — System April 2011