Avaya 4524GT, Руководство по настройке

Страница: 259 / 362

Variable Value
IfIndex Specifies the index value which uniquely
identifies the local interface through which
the next hop of this route is reached. The
interface identified by a particular value of
this index is the same interface as identified
by the same value of ifIndex.
Status Used to create or delete entries.
IPv6 neighbor cache management using EDM
Use the information in this section to view and configure the IPv6 neighbor cache.
Viewing the IPv6 neighbor cache using EDM
View the neighbor cache to discover information about neighbors in your network. Neighbor
cache in IPv6 is similar to the IPv4 Address Resolution Protocol (ARP) table. The neighbor
cache is a set of entries for individual neighbors to which traffic was sent recently. You make
entries on the neighbor on-link unicast IP address, including information such as the link-layer
address. A neighbor cache entry contains information used by the Neighbor Unreachability
Detection algorithm, including the reachability state, the number of unanswered probes, and
the time the next Neighbor Unreachability Detection event is scheduled.
Procedure steps
1. From the navigation tree, double-click IPv6 .
2. In the IPv6 tree, double-click IPv6 .
3. On the work area, click the Neighbors tab.
Variable definitions
Use the data in this table to help you view the Neighbors tab.
Variable Value
IfIndex Specifies a unique Identifier of a physical
interface or a logical interface (VLAN). For
the VLAN, the value is the Ifindex of the
VLAN.
IPv6 neighbor cache management using EDM
Configuration — System April 2011 259