manualshive.com logo in svg

Avaya 1408, Руководство по установке

Поделиться
Скачать
Avaya 1408 Скачать руководство пользователя страница 86

PARTNER Version Installation Manual

Page 86

- Issue 1c (09 April 2010)

IP Office Essential Edition

6.4.3 Backing Up to the Optional Card

This process copies all files on the System SD card to the Optional SD card. It includes the /primary and /backup
folders and the embedded voicemail files including message files. Any matching files and folders on the Optional SD card
are overwritten. 

The process is a simple copy. Any files already copied that change while the process are not recopied. Any new files added
(for example voicemail messages) while the process is running may not be copied. 

This process takes at least 90 minutes and may take much longer depending on the amount of data to be copied, for
example it will be longer if embedded voicemail is being used by the IP Office system to take messages. 

Using IP Office Manager

1. Using Manager main menu, select File | Advanced | Embedded File Management. 

2. From the Select IP Office dialog, tick the box beside the IP Office Essential Edition - PARTNER® Version system

you want to work with. 

3. The file contents of the memory cards are displayed. 

4. Select File | Copy System Card. 

·

The contents of the System SD card will be copied to the Optional SD card. This process at least 90 minutes
and can take much longer. 

Using the System Status Application

1. Start 

System Status

 and access the IP Office's status output. 

2. In the navigation panel select System. 

3. Select Memory Cards. 

4. Select System Card.

5. At the bottom of the screen select Copy System Card. 

·

The contents of the System SD card will be copied to the Optional SD card. This process at least 90 minutes
and can take much longer. 

Using a System Phone

This process can be used by a user configured as a System Phone user and using a 1400, 1600, 2400, 4600, 5400, 5600
or 9600 Series phone (excluding XX01, XX02 and XX03 models). The user's Login Code is used to restrict access to
system administration functions on the phone. 

1. Select Features | Phone User | System Admin. 

2. Enter your IP Office user login code. 

3. From the menu select Memory Card. 

4. Select Copy.

·

The contents of the System SD card will be copied to the Optional SD card. This process at least 90 minutes
and can take much longer. 

Содержание 1408

















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды