Avaya 1408, Руководство по установке

Страница: 105 / 144

PARTNER Version Installation Manual Page 105
- Issue 1c (09 April 2010) IP Office Essential Edition
System Component Details: Base Cards
7.3.4 ATM Combination Card
This card is used to add a combination of ports to an IP500 V2 control unit. Not supported by IP500 control units.
·
Supports
·
6 Digital Station ports.
·
2 Analog Extension ports.
·
4 Analog Trunk ports.
·
10 VCM channels.
·
Maximum per IP500 V2 Control Unit: 2.
· IP500 Daughter Card Support: 1. The trunk daughter card is pre-
installed and cannot be replaced with another card type.
Features Port LEDs
Digit Station: Ports 1 to 6
Phrase IP500 Analog Ports Provides DS ports for digital
stations.
·
Green On - Phone detected.
·
LED1 is used for base card status:
·
Red On = Error
·
Red Slow Flash = Initializing.
·
Red Flash every 5 seconds = Card okay.
·
Red Fast Flash = System shutdown.
Analog Extensions: Ports 7 to 8
·
Supports ICLID modes DTMFA, DTMFC, DTMFD, FSK
and UK20.
·
REN 2 (1 for external bell device).
·
Off-Hook current: 25mA
·
Ring Voltage: 40V.
·
Intended for connection to two-wire analog phones, the
ports do not include a ringing capacitor. For connection
to 4-wire analog phones, connection should be via a
master socket with ringing capacitors.
·
During power failure extension port 8 is connected to
the analog trunk port 12.
No status LEDs are used for analog phone extensions.
Analog Trunk: Ports 9 to 12
·
DTMF, ICLID, Busy tone detection.
·
Over-voltage and lightning protection.
·
DTMF and LD dialing.
·
Adjustable echo cancellation (default 16ms). Selectable
to Off, 8, 16, 32, 64 and 128 milliseconds.
·
Green on: Card fitted.
·
Green flashing: Trunk in use.
·
LED 9 is used for daughter card status.
·
Red On = Error
·
Red Slow Flash = Initializing.
·
Red Flash every 5 seconds = Card okay.
·
Red Fast Flash = System shutdown.
Name Description SAP Code
IPO IP500 V2 COMBINATION
CARD ATM IPO IP500 V2 COMBINATION CARD ATM 700476013