Avaya 1408, Руководство по установке

Страница: 52 / 144

PARTNER Version Installation Manual Page 52
- Issue 1c (09 April 2010) IP Office Essential Edition
4.8 Connecting an External Expansion Modules
Any external expansion modules should be connected to the control unit before
power is applied to the control unit. The module connects to the IP Office control
unit using an expansion interconnect cable.
Each module is supplied with an expansion connect cable and a power supply unit.
An IEC60320 C13 type earthed power cord is required.
· The external expansion module is supplied with a blue 1 meter (3'3'')
expansion interconnect cable. This cable must be used when connecting
to expansion ports on the rear of a control unit.
Installation Requirements
·
o Installation space either on or under the existing IP Office control unit.
·
o Switched power outlet socket.
·
o Available EXPANSION port on the control unit.
·
o
Connections of a protective ground.
Tools Required
·
o Manager PC.
· o Tools for rack mounting (optional).
Parts and Equipment Required
·
o External Expansion Module.
Each module is supplied with a suitable external power supply unit and a 1m blue interconnect cable. 2m Yellow
interconnect cables are supplied with the IP500 4-Port Expansion card and should only be used with that card.
·
o Power cord for the power supply unit. An IEC60320 C13 type earthed power cord is required.
·
o Rack mounting kit (optional).
·
o Cable labeling tags.