Avaya 1408, Руководство по установке

Страница: 8 / 144

PARTNER Version Installation Manual Page 8
- Issue 1c (09 April 2010) IP Office Essential Edition
1.1 System Components
The following are typical components of an IP Office Essential Edition - PARTNER® Version system.
· IP Office IP500 V2 Control Unit
The control unit holds the main configuration and performs the
routing and switching for telephone calls and data traffic. The
control unit includes 4 slots for optional base cards to support
trunk and phone extension ports.
·
Avaya System SD Card
This card is used to hold system files and provide voicemail.
The card has a unique serial number which is is used to
validate license keys entered into the system's configuration.
The card is mandatory for correct system operation.
·
Power Cord
The control unit is not supplied with a power cord. An
IEC60320 C13 type earthed power cord is required.
·
IP500 Base Cards
The IP500 control unit has slots for up to 4 IP500 base cards.
These can be used to add analog, ETR and digital phone extension
ports.
·
IP500 Digital Station 8 Base Card (Maximum 3)
Each card supports up to 8 1400 series phones.
·
IP500 Analog Phone 2/Phone 8 Base Cards (Maximum 4)
Each card supports 2 or 8 analog phones.
·
IP500 ETR6 Base Card (Maximum 3)
Each card supports up to 6 ETR phones (only 2 ETR34 or
ETR34D phones).
·
IP500 Trunk Daughter Cards
The IP500 base cards can be fitted with an IP500 trunk daughter
card in order to support trunk connections.
·
IP500 Analog Trunk Card (Maximum 4)
This card provides 4 analog trunk connections.
·
IP500 PRI Trunk Card (Maximum 1)
This card provides a single PRI/T1 trunk connection.
·
IP500 ATM Combination Cards (Maximum 2)
This card is a pre-paired base and daughter card. It provides 6
digital station ports, 2 analog phone ports, 10 VCM channels and 4
analog trunk ports. The trunk daughter card cannot be removed or
replaced with another type.
·
VCM channels are required for support of SIP trunks. This is
the only type of card that provides VCM channels for IP Office
Essential Edition - PARTNER® Version.
·
IP500 External Expansion Module
One external expansion module can be added.
·
IP500 Phone 16 Expansion Module
This type of external module adds support for 16 additional
analog phone extensions.
·
IP500 Digital Station 16 Expansion Module
This type of external module adds support for 16 additional
ports for 1400 Series phones.
·
Power Cord
The external expansion modules include an external power supply
unit but do not include a mains power cord. An IEC60320 C13 type
earthed power cord is required.
·
Cables
The IP Office is designed primarily for connection to a structured
cabling system using CAT3 UTP cabling. This approach allows
telephone and data traffic to share the same wiring infrastructure
and simplifies equipment moves.