AVANT 735 2020, Руководство оператора

Страница: 97 / 140

Avant 735 Storage, Transport, Tie down points and Lifting
97
Storage
If outdoors storage is necessary, protect the machine
with the designated weather cover (part no. 65436).
Do not use the full, closed
transport and weather cover over
long periods of time as it promotes
corrosion due to moisture that will
condense inside it. The light
weather cover can be used.
. ..
Before long term storage (more than 2 months),
prepare the loader to ensure long service life and
trouble-free use of the loader.

It is recommended to have the periodic service
made before storage. Contact Avant service.

Clean the loader carefully.

Check and touch-up painted surfaces, if
necessary, in order to avoid rust damages.

Grease the greasing points and lubricate the
piston rods of the cylinders with oil.

Remove the battery from the loader and store it
in a cool, well-ventilated place. Charge the
battery monthly.

Store the loader indoors if possible. Do not store
the loader in direct sunlight.

See the engine owner’s manual to prepare the
engine for long term storage.

Inflate the tyres to the recommended tyre
pressure.

Fill the fuel tank and the hydraulic oil tank to the
maximum marks.

Cover the engine exhaust pipe outlet.
.
Lifting of the loader
Lifting a loader with ROPS: When lifting a loader
equipped with the ROPS frame, use four lifting slings
that are approved for lifting purpose, and which are
minimum 2000 mm (79 inches) long. Loop the slings
around the four ROPS posts. Lifting kit A418706
includes all necessary parts and detailed instructions
to lift a loader with ROPS frame.
Make sure that the lifting slings cannot move and
that the loader doesn’t swing during lifting. Loop the
lifting straps around all four ROPS posts and make
sure they are not tied or get damaged by e.g. sharp
corners.
Lifting a loader with cab LX/DLX: To lift a loader
with cab LX or DLX, four appropriate type of lifting
eyelets must be installed on the pre-threaded holes
of the cab structure, on the roof of the cab. Lift the
loader using lifting chains and hooks. Lifting kit
A417352 includes all necessary parts and detailed
instructions to lift a loader with cab LX/DLX.
CAB L: When lifting a loader that is equipped with
the Cab L, remove the window panels (front, side
and rear window panel) before lifting.