AVANT 735 2020, Руководство оператора

Страница: 70 / 140

Controls and options of the Loader Avant 735
70
.
Cab Safety
Make sure visibility from the cab is adequate. Keep
all window panels clean and clear of snow, ice, etc.
Familiarise yourself with the special drive features
and space needs of this articulated loader, equipped
with cab, on a flat, even and open place.
Remember that, when turning, the cab extends
beyond the turning radius of the wheels. This should
be taken into consideration especially when driving in
confined spaces, in order that the rear of the cab will
not get damaged.
In case the normal
opening on the left side
of the loader is blocked,
the windscreen can be
used as an emergency
exit.
If necessary, the
windscreen can be
broken with the
emergency hammer
located in the cab.
Always make sure that the following equipment are
functional and present in the cab:

Emergency window hammer

Removable safety pin on the right side window

Windscreen wiper and washer

Functional heater and its blower for de-misting
the windscreen

Side mirrors

Cab air filter must be in place
CAUTION
Risk of breaking glass - Do
not drive with an open cabin
door. The door may break
upon contact with wheels.
Also, turn the articulated frame
to straight position before
opening the door.
Windscreen washer and wiper
On loaders that are equipped with cab LX or DLX,
the windscreen washer is operated with multi-
function control switch fitted to the right side of
steering column.
The switch has the following controls:
1.
Spray washer fluid
2.
Intermittent operation
3.
continuous operation, slow
4.
Continuous operation, fast
Windscreen washer tank and
filler cap on loaders with cab
LX and DLX are located
outside the cab, in front of the
windscreen on the left.
If ambient temperatures may drop below freezing
point, add freeze resistant washer fluid beforehand
and use the washer until it runs though the spray
nozzle. Freezing water can damage the pump, tank,
hoses and their connectors, and the nozzle.