AVANT 735 2020 страница 5 Скачать руководство пользователя | Manualshive

Страница: 5 / 140

background image

Avant 735

Safety First

5

.

Intended use

Avant 735 is an articulated compact loader, designed and manufactured for both private and professional use. The
loader can be equipped with attachments offered by Avant Tecno Oy, which enables performing several different
jobs. Because of this multi-purpose nature of the machine and the various attachments and tasks, read always not
only this Manual but also the Operator's Manual of the attachment, and follow all instructions. Every person who
has to do with this machine must follow work safety regulations, all other generally accepted rules related to work
health and safety, and all road traffic regulations.

Remember that safety consists of several factors. A loader by itself, or equipped with an attachment, is very
powerful and can cause serious personal injuries or property damages if it is operated in a wrong or careless way.
Do not operate an attachment unless you have familiarised yourself with the use of it and the eventual dangers
related to it. The loader is not intended to lift or transport people or be used as a work platform. Different jobs
require different attachments, and it is not allowed to handle any loads or materials without any attachment fitted.
The loader must not be used in underground or tunneling work. Loads must not be suspended onto the loader
boom.

This loader has been designed to require as little maintenance as possible. The operator can perform the routine
maintenance operations. There are however more demanding service operations that can be done by professional
service personnel only. Any service operation is permitted only when wearing appropriate protective equipment.
Original spare parts must be used. Familiarise yourself with the service and maintenance instructions in this
Manual.

Contact your local AVANT dealer, if you are uncertain of anything concerning the operation and maintenance of
this loader, or for any questions, service or spare parts.

In addition to the safety instructions included in this manual, you must observe all occupational safety regulations,
local laws, and other regulations concerning the use of the equipment. Particularly the regulations concerning the
use of the equipment on public road areas must be observed. Contact your Avant dealer for more information
about local requirements before you operate the loader on road areas.

«
...
3
4
5
6
7
...
»

Содержание 735 2020













































































































































Отзывы:

Нет отзывов

Похожие инструкции для 735 2020

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды