12
(C) CHAN
GE THE PLAYER’S IP ADDRESS –
USING A TEXT EDITOR:
Each player is delivered with an SD Card containing an initialization file. To set the p
layer’s IP address
into the same IP range of the computer’s IP address, modify the
p
layer’s initialization file by changing
the default IP address to a new, unique IP address (see
detailed information). Plug the SD Card containing the modified initialization file back into the player
or save the file to a USB data carrier if you want to use this device instead of an SD Card. The Player
will immediately accept the changes.
STEP 3: WEB BROWSER
Open your web browser and enter the UHD P
layer’s IP address in the address bar.
5.4.
POWERING THE PLAYER
Plug the power adapter into the
on the UHD Player’s rear side.
When the player
on the UHD Player’s front side
will first light up orange and then red. As
soon as the player is ready for operation
,
it will turn green.
If no SD Card or USB Data Stick is plugged in,
the player’s
Web Interface Info Screen will show up on
your HDMI output device and display information about the network and video settings, sync mode,
current firmware, serial number, etc.
Fig. 7:
The UHD Player’s Web Interface Info
Screen is displayed when there is no data carrier inserted.
5.5.
PLAYBACK MEDIA FILES
The simplest way of playing back media files with a UHD Player in Standalone Mode is as follows:
•
Save your
to the root folder of the supplied SD Card or any other
USB data carrier (e.g. SD:/ or USB:/).
•
Plug the data carrier into the
