7
4.1.1.
REAR PANEL VIEW AND PORTS
Fig. 3: UHD Player rear panel
4
ANALOG STEREO AUDIO RCA CONNECTORS
5
HDMI OUT Port
6
HDMI IN Port
7
LAN PORT
8
RS232 SERIAL PORT
9
POWER CONNECTOR
(4) ANALOG STEREO AUDIO RCA CONNECTORS
To use the stereo analog audio out, please connect your audio devices to these RCA female
connectors.
RED connector = right audio channel
WHITE connector = left audio channel
(5) HDMI OUT PORT
Connect your digital output device, e.g. a display or projector, to the player and send out digital video
and audio via this HDMI 2.0 out port.
(6) HDMI IN PORT
The HDMI 2.0 Input port
on the rear panel enables you to use an external video/audio source as (live)
input. The external video/audio source may then be displayed just like media content that is stored
on the attached data carrier.
The HMDI Input port supports incoming video signals of
up to UHD 3840x2160@60p.
See the
for details of how to integrate this input port.
(7) LAN PORT
The UHD P
layer’s LAN Port is a standard RJ
-45 connector for 1000 Base-T Ethernet communications.
Connect the UHD Player to your network if you want to use its web interface, to sync several players
or to control it
,
e.g. via an Avio Master Device.
(8) RS232 SERIAL PORT
The RS232 serial port is a serial communication interface that allows you to control the player from a
PC or other control devices. Use a standard DE-09 connector to connect your device to the player.
Communication settings:
The default baud rate is 9600, 8 data bits, with no parity bit and one stop bit.
The baud rate may be changed via the Web Interface or the Initialization File.
