AV Stumpfl UHD Player, Руководство пользователя

Страница: 19 / 96

15
6.1. WEB INTERFACE
Using the Web Interface is a fast and intuitive way of configuring the UHD Player. You need a
network connection to access the UHD Player via its web interface. Refer to the
Connecting the
Player to the Network and Network Settings chapters for network details.
Open your web browser and enter the UHD P
layer’s IP address in the address bar. The Web Interface
will now appear.
Fig. 8: The UHD Player’s Web Interface shows the Info Page.
Alternatively, t
he UHD Player’s Web Interface may be directly accessed with a mouse (and keyboard)
connected to the player’s USB peripheral ports , e.g. when no LAN connection is available. Make sure
that your HDMI output device is attached to the player and that the player is powered. If there is
only a mouse connected, all settings where text fields need to be filled can be modified using the on-
screen keyboard.
PLEASE NOTE:
If your output device does not show anything, it may be that it does not support the current
resolution. With the following keyboard shortcuts, two different resolutions can be set and tested:
Ctrl+F2 or Ctrl+F
Sets the resolution to 1920x1080p60
Ctrl+F3 or Ctrl+U Sets the resolution to 3840x2160p60
PLEASE NOTE:
If the playback is active, remove the data carrier or use the following keyboard shortcut to toggle
between the Web Interface and the Playback:
Ctrl+F5 or Ctrl+S
Toggles Settings/Playback
See all available keyboard shortcuts in the
Keyboard chapter .