User Guide
P. 8
Temporary Chirp Delete
To temporarily disable the chirp confirmations of the siren upon arming and disarming (e.g. in a
quiet neighbourhood):
1.
Press the
TRUNK
button.
2.
Within 3 sec., press the
LOCK
or
UNLOCK
button to arm or disarm without any chirps.
Advanced Features: Installation-programmable Options
The System was designed with flexibility and OEM integration in mind. With its programmable
options, this unit can single-handedly control nearly any electrical system in your vehicle.
Caution
:
The programming of your system should be left to a professional. Changing any
one of the settings may affect the operation of your System.
The installation-programmable options are as follows:
Remote Door Locks
Priority Door Access
Passive or Active Arming
Starter Kill / Anti-grind feature
Shock Sense and Warn-away
Disarmed Notification
Siren / Horn Chirps
Car Finder
Siren / Horn Chirp Timing
Safe Start
Home Valet
Ignition-controlled Door Locks
Ignition Re-lock
Relock
Secure Lock
Turbo Mode
Remote Trunk Release
Engine Run Time
Separate Start and Stop buttons.
Multi-car Operation
Remote Door Locks
If your System was installed with the Remote Door Locks option, you will have the convenience of
remote keyless entry. See section
Arming and Disarming the System
, earlier in this Guide, for
further instructions on remote door locking and unlocking.
Priority Door Access
(Enabled by default.) If the Remote Door Locks option is installed on your vehicle, this safety
feature allows you unlock solely the driver’s door with a single press of the
UNLOCK
button on the
transmitter; upon a second press of the
UNLOCK
button, all the other doors will unlock.
Active or Passive Arming
(Passive Mode by default.) The alarm and Starter Kill can be configured either to Passive Mode (so
as to arm automatically) or Active Mode (so as to require user intervention for arming). By default,
your System is configured to
Passive Mode
. In Passive Mode, the alarm and Starter Kill will
automatically arm
30 seconds
after the last door is closed. The System will not arm if a door is left
open, or if you re-open a door within the 30-second delay.
Important note:
When the System re-arms automatically or if there is an alarm condition, you
can disarm the System by simply pressing the
UNLOCK
button.
The Starter Kill and the Anti-grind Feature
With this added security feature, the system will prevent your vehicle from starting with the ignition
key when the Starter Kill is armed. If your System was installed with the Starter Kill option, one will
not be able to start your vehicle with the key unless the system has been unlocked and disarmed
first, or put into Valet Mode.
Note:
If the Starter Kill is installed, your vehicle will benefit from a protection against starter
motor damage that could occur after remote-starting the engine should the user, by force of
habit, turn the ignition key to the
CRANK
position.
Shock Sense, Warn-away Sense
(Both enabled by default.) Your System will react to a full shock by triggering the alarm; it can also
respond to a lighter shock (30 % of the strength of a full shock) by giving a
warn-away
(without
triggering an alarm condition).
