User Guide
P. 6
Ignition Valet
This feature will allow you to remotely put your system into Valet Mode by using the ignition key
instead of the Valet button as above. Ignition Valet can be used without a Valet button installed.
To put the system i n t o Ignition Valet Mode:
Insert the ignition key into the ignition switch. Within 10 sec.,
turn the key 5 times successively into the
IGNITION ON / RUN
and
OFF
positions.
The parking lights will flash three times to indicate that the vehicle is now in Valet Mode.
The L.E.D. will come
ON
solid.
The Transmitter will display the
icon; the LED will remain on solid.
To take the system o u t o f Ignition Valet Mode:
Insert the ignition key into the ignition switch. Within 10 sec.,
turn the key 5 times successively into the
IGNITION ON / RUN
and
OFF
positions.
The parking lights will flash twice to indicate that the vehicle is now out of Valet Mode.
The L.E.D. will go out.
The
icon will disappear from the Transmitter; the LED will turn off.
Note
: With the Ignition Valet activated, the remote starter and alarm functions will be disabled.
Start Attempts Indicator (Valet Mode)
This reveals start attempts made while the vehicle was in
Valet Mode
. The parking lights will:
Come
ON
, go
OUT
; then
Flash
twice
.
“Home Valet
TM
” Mode
If configured at installation, this feature will remotely set the vehicle to a no-remote-start mode: if
the vehicle is parked indoors there is no danger of it starting accidentally by remote control.
Note:
Once the Home Valet Mode is activated, the vehicle will not start by remote but the
alarm functions will still be active.
To take the system i n t o Home Valet Mode:
Press the
LOCK
or
UNLOCK
button.
Within 5 seconds, press the Lock and
START/STOP
button simultaneously.
The Transmitter will BEEP once and will display the
icon.
To take the system o u t o f Home Valet Mode:
Turn the ignition key to the
IGNITION ON (RUN)
position.
The Transmitter will BEEP once and the
icon will disappear.
The system will warn you if someone attempts to start your vehicle while it stands in Home Valet
Mode. The parking lights will:
Go
ON
then
OFF
; then
Flash
twice
, pause; then
Flash
twice
again.
Remote Valet Mode
This feature will allow you to remotely put your system into Valet Mode by using the transmitter
instead of the Valet button as above.
Getting i n t o Remote Valet Mode
•
Hold the
UNLOCK
and
START/STOP
buttons simultaneously for 3 seconds.
•
The Parking Lights will flash 3 times.
The Transmitter will BEEP once and will display the
icon; the LED will remain on
solid.
