Installation Guide
P. 11
Once you access a particular programming Mode, you will automatically start at Functi on 1. Once
you select one of the Options of Function 1, you will automatically be taken to the next Function.
To select one of the four Options
of any given Function, press the corresponding button on the
Transmitter:
•
LOCK
button ......................to access Option 1
•
UNLOCK
button ..................to access Option 2
•
TRUNK
button ....................to access Option 3
•
START/STOP
button .............to access Option 4
Table 4: Accessing options
In each Function, once an Option has been selected the Parking Lights will flash 1, 2, 3 or 4 times
(depending on the selected Option).
Please note
that the different Functions within any particular
Mode can only be accessed sequentially: the Programming Centre will move from Function 1 to
Function 2, then to Function 3, and so on. Therefore, whenever you access a particular Mode, be
prepared to re-configure all the Functions of that Mode in ascending order.
Programming Options
MODE 1
* INDICATES DEFAULT SETTING
FUNCTION 1 – Ignition-controlled Door Locks
OPTION 1* Ignition Lock
DISABLED
OPTION 2
Ignition Lock
ENABLED
OPTION 3
Ignition
UNLOCK ONLY
OPTION 4
Ignition
LOCK ONLY
FUNCTION 2 – Secure Lock
OPTION 1* Secure Lock
DISABLED
(1-sec. Disarm pulse)
OPTION 2
Secure Lock
ENABLED
in Smart Mode
OPTION 3
Secure Lock
DISABLED
(1/2-sec. Disarm pulse)
OPTION 4
Secure Lock
ENABLED
in Standard Mode
FUNCTION 3 – Door lock pulse timing
OPTION 1* 7/10-sec. Lock/Unlock pulses
OPTION 2
4-sec. Lock/Unlock pulses
OPTION 3
7/10-sec. Lock pulse and two 1/4-sec. Unlock pulses
OPTION 4
1/10-sec. Lock/Unlock pulses
FUNCTION 4 –
AUX 3
Programming
OPTION 1* Constant output while the
TRUNK
button is pressed
OPTION 2
1-sec. output when
TRUNK
button is pressed for 3 sec. with Ignition
OFF
or under remote run
OPTION 3
Output with Disarm and Rearm pulses (the Alarm is disarmed while the
Trunk is open; the Alarm rearms automatically afterward)
OPTION 4
1-sec. output when
TRUNK
button is pressed for 3 sec. with Ignition
OFF
or under remote run
FUNCTION 5 –
AUX 2
Programming
OPTION 1* Priority Door Access on 1
st
UNLOCK
with unlocking of all doors on each subsequent
UNLOCK
; with
CAR FINDER
OPTION 2
Toggle
ON/OFF
(with 30-second timeout)
OPTION 3
Constant output while the
LOCK
and
UNLOCK
buttons are pressed
OPTION 4
Priority Door Access on 1
st
UNLOCK
and on each subsequent odd
UNLOCK
with
unlocking of all doors on each subsequent even
UNLOCK
; with
CAR FINDER
