2
Table of Contents
Description………………………...………………………………….……………2
Module Possibilities………………………………………………………………..2
Package Content……………………………………………………………………2
Signals………………………………………………………………………...……3
Connection…………………………………………………………………………5
Preparation for Work……………………………………………………………….6
Basic Functions…………………………………………………………………….6
Additional Functions………………………………………………………….……8
Troubleshooting………………………………………………………………...…13
Glossary…………………………………………………………………………...15
Description
The
Autoplugin RCP-F2
module is intended for remote control connection to the
fuel-fired heater (parking heater, fuel operated heater, pre-heater), factory installed
in
Ford Focus 2
(2004-2011),
Ford С-Max
(2003-2010) or
Ford Kuga
(2008-
2012). The device controls the heater via CAN-bus.
Module Possibilities
·
Heater control by various impulses
·
Heater status signals outputs
·
Embedded remote control of the heater by using the original 3-button
Ford car’s key
·
Remote cancellation of heater startup, programmed in the driver
information system
·
Indication of successful/unsuccessful start and of autonomous operation
of the heater with the direction indicators in rear-view mirrors.
·
Extended boost heat mode control
·
Main battery protection from discharging by inspecting of voltage level
and heater operation time
·
Heater errors clearing (unblocking)
Package Content
1. Autoplugin RCP-F2 (0101-1110) module
2. Wiring for permanent connection
3. Plug-n-Play cable
4. Technical description brochure
5. Installation manual brochure
