DPM3 User Manual, 1st Edition
User Manual - DPM3 Series Panel Meters
18
Input
Display
1
2
3 4 5
In order to obtain more accuracy it is recommended to program the highest possible number
of points and reduce the segment length.
Input values must always be programmed in an
increasing or decreasing order. Avoid assigning two different display values to two equal
input values.
Display values can be entered in any order and even be repeated for different
inputs.
Below the first point programmed, the relationship established between the two first points of
the scale is followed. Above the last point programmed, the relationship established between the
two last points of the scale is followed.
Programming of the scale
There are two methods for programming the scale, the
SCAL
method and the
tEACH
method.
±
.
±
.
points=2
points =3
points =n
points =11
±
.
±
.
±
.
3s?
±
.
3s?
2
±
.
±
±
.
±
.
±
.
Dec. point
3s?
ENTER:
Vertical displacement.
UP:
Changes active digit.
SHIFT:
Horizontal displacement.
To configure a
nonlinear process
using 3 up to 11
points, press the
ENTER key for
>3 seconds
Programming Key Pad
