30
Axess® Pro Series 3100
Owner Installation Instructions
Control Board Adjustments
Menu 6.12 Remote Code
The logic console supports the Remote Code Set feature. This parameter can be used to disable the feature for security
or transmitter management reasons.
Menu 6.13 Activity Reports
This parameter enables activity report outputs. Contact Automatic Technology for more details.
Menu 6.14 Activity Report ID
This parameter sets the ID of the logic console that is sent with the activity report. Contact Automatic Technology
for more details.
Menu 6.15 Vacation Mode
Vacation Mode blocks all but one designated remote control transmitter from activating the Axess® Pro Series 3100.
The mode is activated by pressing a transmitter button with the VAC function assigned until the console displays
that Vacation Mode is enabled (approx. 5 secs). When activated all the transmitter buttons will be ignored. To turn
Vacation Mode off, press a transmitter button with the VAC function assigned. Vacation Mode can also be turned
on or off manually by editing the Vacation Mode parameter. Vacation Mode can be turned on or off using this
parameter.
Menu 6.16 Password Protection
The password feature enables all parameters and confi guration settings to be protected unless a password is
entered. When this feature is turned on the User is requested to enter the desired password to be used. The
password protection feature has a time-out that expires after 60 seconds of inactivity. Alternatively, the User may
log out manually by pressing exit when the main screen is displayed. PG3 can disable the password.
Menu 6.17 Transmitter Grouping
The transmitter store number display format can be changed to show a grouped format. When grouping is
selected, instead of displaying the store location as a number between 1 and 511, it will display as ##$ where ##
is the group number and $ is a character a,b,c,d,e,f,g or h which indicates the group member.
Menu 6.18 Fault, Auto Reset
When selected, the controller will reset any fault automatically.
Menu 6.19 LED Low Power Mode
When LED low power mode is selected the controller will turn the LED power off to save power.
Menu 6.20 Console OSC Buttons
Console can be locked out by selecting console OSC buttons OFF.
Menu 6.21 AUX Output Operation
AUX output can be selected to be driven by:
Light Drive
A light relay module can be connected on the console between V+ and AUX OUT terminal which will turn
the courtesy light on and off.
Clock/Transmitter
By selecting this option AUX output can be triggered by programming the clock timer or by
the transmitter.
Open Status
Selecting this option will cause the AUX output to stay active as long as the shutter stays
open.
Close Status
Selecting this option will cause the AUX output to stay active as long as the shutter stays
closed.
