Automatic Systems
Logic D1 v06-02-en0802.doc
ERB-PM
Technical manual
6/31
A. THE CONNECTORS
X1
(
1:1
) for the single-phase power supply:
PE: Earth.
N: Neutral
L: Live
X2
(
1:2
) supplies the electrical power of the motor by U, V and W
(PE terminal have to be connected to the earth of the motor):
Important: it is necessary to install a starting capacitor between terminals U and V.
The following drawing shows how to connect a three-phase motor to the AS1200.
X3
(
1:3
) is used to plug in the board for sensors 1 and 2.
X4
(
1:4
) is used to plug in the board for sensors 3 and 4.
X5
(
1:5
) is used to connect an additional board (AS1220).
X6
(
1:6
) is used to connect another additional board (AS1210).
X7
(
1:7
) and X8 (
1:8
) are the two inputs (24V in negative logic with high impedance,
consumption of 10mA) and outputs connectors (relay: potential free contacts;
max. 48V, 100mA) making the following external connections possible:
U
V
W
PE
Power Supply
230 V SINGLE-PHASE
240 V SINGLE-PHASE
110 V SINGLE-PHASE
TRIANGLE
W1
U2
V2
V1
W2
U1
Red
Green
Blue
Yellow
White
Black
CONNECTOR
X2 AS1200
Condenser :
BL 16 = 20µf
BL (other) = 40 µf
BL (other) 110V = 130 µf
