Autodesk 057A1-05A111-1001 - AutoCAD LT 2009 Скачать руководство пользователя

Страница: 87 / 184

Specify Angles and Distances

Start a new drawing

Click Menu Browser

➤

File

➤

New.

Select the tutorial drawing template file that is closest to your intended application and units of
measurement:

■

Tutorial-mArch.dwt

Sample architectural template (metric)

■

Tutorial-mMfg.dwt

Sample mechanical design template (metric)

■

Tutorial-iArch.dwt

Sample architectural template (imperial)

■

Tutorial-iMfg.dwt

Sample mechanical design template (imperial)

Click the Model tab.

Click File

➤

Save. Use

MyDesign

as the file name.

Use Grid and Snap to create a drawing

On the status bar, turn on Grid and Snap. Dynamic Input should also be turned on.

Click Menu Browser

➤

Draw

➤

Line and click several locations to create a series of line segments

to create the previously illustrated design. The exact dimensions don’t matter, but use reasonable
distances for the design. Press ENTER to end the command.

Click Menu Browser

➤

Draw

➤

Circle

➤

Center, Radius.

Click a point to locate the center of the circle, and then click another point to specify its radius.

Turn Grid and Snap off.

Create a line using object snaps

Click Menu Browser

➤

Modify

➤

Erase.

The crosshairs cursor changes into a square

pickbox

cursor.

Click directly on one of the lines that you created and then press ENTER.

The line is erased, but how do you create another line to take its place with precision?

Click Menu Browser

➤

Draw

➤

Line.

Press SHIFT and right-click. From the object snap menu, click Endpoint.

Move the cursor over an endpoint of a line. When you see an AutoSnap marker, click.

Press SHIFT and right-click again. From the object snap menu, click Endpoint.

Move the cursor over the opposite endpoint and click. Press ENTER to end the command.

The endpoints of the new line are located exactly at the endpoints of the adjacent lines.

Содержание 057A1-05A111-1001 - AutoCAD LT 2009

























































































































































































Результаты поиска

Содержание 057A1-05A111-1001 - AutoCAD LT 2009

Отзывы:

Похожие инструкции для 057A1-05A111-1001 - AutoCAD LT 2009

Бренды по названию

Популярные бренды

Autodesk 057A1-05A111-1001 - AutoCAD LT 2009, Руководство по началу работы

Результаты поиска

Содержание 057A1-05A111-1001 - AutoCAD LT 2009

Отзывы:

Похожие инструкции для 057A1-05A111-1001 - AutoCAD LT 2009

Бренды по названию

Популярные бренды