AUTO
CRIB
f.
Once the bin has been positioned in front of the doors, you must call the door. LON
DD (D is for Door Number). Ie. LON 15. This will open door 15.
g.
An invalid bin number will return an error (E2). If the tray configuration is unknown,
please refer to the numbering scheme provided at the time of installation.
h.
Other commands that can be used:
i.
RSA (Report Status All): If system is calibrated and all doors are closed,
the system will report back “OK”. If a door is open, the system will report
back “DO”.
ii.
TST M or TST L: moves the main platter or LSP one complete clockwise
revolution.
iii.
CAL M or CAL L: moves the main platter or LSP one complete counter
clockwise revolution.
iv.
To view more Controller Commands, please reference Appendix I.
Note: Under normal circumstances, the Maintenance function should be used. In an instance where the
RoboCrib software has locked up, the MTTTY editor may be necessary to troubleshoot problems or call
bins.
II. RoboCrib Software Operations
NOTE: An employee must be designated as a stocker in order to perform the following functions.
1.
Restocking Using the Automatic Bin Method.
a.
Press the
“Stock”
button
b.
Enter your employee ID and PIN number.
c.
Press the “
Automatic
” button
d.
Press the “
By Bin
” button
e.
Type in the bin number or hold the bar coded label on the package in front of the laser
scanner window
f.
The system will then retrieve the correct bin, open the bin access door and increment
the on hand quantity by 1
g.
Repeat the above process until complete
2.
Restocking Using the Automatic Tag Method.
a.
Press the “
Stock
” button.
b.
Enter your employee ID and PIN number.
c.
Press the “
Automatic
” button.
d.
Press the “
By Tag
” button.
e.
Type in the Tag number. You can find the tag number by printing the Inventory Input
Sheet – RoboCrib report.
f.
The system will prompt “Is this tag complete?”
i.
If the option “YES” is chosen, everything on that tag will be received.
ii.
If you cannot fill the entire tag, you must choose the option “NO”. This
option allows the user to tell the system whether or not each bin can be
filled.
16
