23
3.4 MOdES SET UP
The AA702 base station must be powere
d
up to access AA570
Set up Menu.
The
system can be set up to operate your choice of equipment on the boat. The
standard kit has one master base station and one console. Each base station has 6 outputs.
Up to 2 slave stations can be attached to the master station to provide extra outputs. The
default system is 1 windlass located on the bow. The options available are explained below,
followed by examples of system setups.
3.4.1 WINdLASS SETTINGS
Allocate the outputs for windlasses and anchoring operations in the Modes menu.
3.4.1.1 Win
d
lass Location - Outputs 1 an
d
2 (
If you have more than one windlass you will need to allocate the outputs and enter the
windlass locations into the system. An individual base station is required for each windlass
. The windlass outputs must be Output 1 and Output 2. The outputs are operated using the
up and down
AA
5
70
3.5 ALLOCATE MOdES (FUNCTIONS) TO THE AA702 BASE STATIONS
After the AA702 base stations have been connected to the equipment the console must be
set up to operate it. Follow the instructions below:
Turn the AutoAnchor off
Hold together to display the Setup menu.
Scroll to Modes.
Select Modes.
Select the AA702 base station that you wish to set up.
The ID of all base stations connected to the system will display
automatically. If you have more than 1 base station
you need the ID for each station.
The ID is on the white label next to the
registration switch. This number is the
same as the the last 4 digits on the bar
code label on the outside of the base station.
0D
0D
Base Station ID
Follow the screen prompts to select the functions for each base station.
Note:
When selecting the base station this message may appear for a
few seconds. If it stays for longer than 30 seconds the base station may
not be powered up or it may be too far away.
F
or Twin Windlass Setup)
buttons.
S
ee
3
.
2
.7 for addin
g
addin
g "
slave
"
base stations.
Select Windlass Positions on each AA570 Console
