25
3.5.1 To Access windlass Set up
Turn the AutoAnchor Off.
Turn the AutoAnchor Off.
Hold together to access the Set up menu.
Scroll to Windlass.
Select Windlass.
Select Windlass.
3.5 wINdLASS SET UP
For accurate counting you must set up the AutoAnchor with information for your windlass.
Record the settings for future reference.
3.5.2 Set docking distance
Defaut = 1.5m or 4ft. Minimum setting = 1m or 3.3ft.
Note: During retrieval the windlass stops at the docking distance.
Scroll to Docking distance.
Select docking distance.
Increase or decrease the docking distance.
Save and return to Windlass Setup.
Setting:
3.5.3 Set Total Rode Length
Add total length of chain plus total length of rope.
Defaut = 60m or 196ft. Minimum setting = 10m (33ft).
or OFF to operate as a counter only.
Scroll to Total rode length.
Select Total rode length.
Increase or decrease the value in meters or feet.
Setting:
3.5.4 Set Rode
Scroll to Rode.
Select Rode.
Select Chain only or Rope and chain and follow the
instructions below to enter the settings for the rode selected.
This is the length of chain that is released during one complete turn of the chainwheel.
The information for some windlasses is listed in Appendix 1. If your windlass is not listed
follow the instructions below to calculate the chain per turn.
3.6.1 Chain Per Turn
3.6 CHAIN ONLy ROdE SET UP
Setting:
Set
