19
FULL SYSTEM TEST
If more
information is
needed, this
screen may
appear.
Choose
engine
type, and
displacement.
If diesel, then
touch OK.
Perform
inspection,
correct any
found issues,
then check
the box, and
touch OK.
Touch the red
enter box, to
enter the rated
output of the
alternator. Then
touch start.
Choose the
number of cyl-
inders, then
touch Ok.
Repeat,
same as
above, but
for charging
system.
If not using
Probe, skip
to page
21, under
heading of
“Testing W/O
Probe, (at
step 41).
Follow on
screen prompt,
then touch Ok.
21
24
27
22
25
28
Follow on
screen
prompt.
The tester
will recognize
when the
engine is
cranked and
started.
26
Follow this
diagram.
Probe
placement is
important for
proper results.
Be sure it is
placed on the
cable between
the battery
pack, and
starter.
23
Battery
pack
results.
Touch next
to continue.
20
