45
The Control Module will not turn
on due to a completely discharged
Control Module battery
On the Control Module (CM), hold the power button for at least 5 seconds.
If the CM still does not turn on, place the CM into the Load Module. Place the entire unit into the
wall mounted charging station, and look for the Load Module's LED to go to a solid, or blinking
red. Let the CM & LM charge for at least 3 hours.
The Load Module LED is off.
Remove the CM, and press the LM button for 1 second, and release. The LED should turn
red for about a second, then turn green. If the LED still does not turn on, the LM battery
may need to be charged. Reinstall the CM onto the LM, and place the entire unit into the
wall mounted charging station. The LED on the LM should turn on, to a solid red while
charging. Let the unit charge for at least 3 hours.
To power the Control Module
on while the Control Module is
charging
Press & hold the power button until the Samsung Splash screen appears. A few seconds
later, a battery outline will appear on the screen. When it does, press and hold the power
button while the battery outline is visible. Once the battery outline goes away, release the
button. The Samsung Splash screen will appear, and the CM will continue to boot.
The Control Module will not
make a Bluetooth connection to
the Load Module
Please see BCT-460 does not read battery temperature, earlier in this Troubleshooting
guide.
TROUBLESHOOTING
