21
FULL SYSTEM TEST
Both gauges
will show
power when
connected
correctly. Touch
START TEST
to continue.
In process,
please wait.
41
42
With good
starting
VDROP (as
shown), touch
Next.
If failed
VDROP,
follow on
screen
prompts for
retest.
Touch
START to
begin.
44
45
This screen
will not always
appear. It only
appears if more
information is
needed for the
current test.
43
Follow this
diagram.
Starter post
adapters are
available
through
AutoMeter
Products for
easier con-
nections in
tight areas.
40
Here you
can check
any replaced
components,
or add notes,
then touch
Done. If noth-
ing replaced,
and no notes,
you can
simply touch
Done.
Testing complete “With Probe”.
The following refer to testing
W/O the current probe.
Testing W/O Probe/Amp
Clamp See Below.
For testing with NO PROBE,
steps 1 thru 22 remain
the same (except step 5,
make sure probe option is
“unchecked”). We will now
pick up from step 22 for NO
PROBE testing.
39
Review
results, then
touch Next. .
38
