10
TESTER CONFIGURATION
1. Dealer Information
2. For use with AMPNET. Set if email is desired
for test result.
Default Email: Email will be sent to the
account associated with AMPNET
Subscription.
Customer Email: Allows the customer to
provide a new email address to receive
results.
3. Additional test information. Check to enable
additional test information to be prompted for
entry for individual tests and system tests.
4. Temperature °F or °C.
5. Check to use previously tested Battery Type.
6. Set to default to use previously used battery
rating unit. Clear to use default rating value.
7. Set to default to use previously used rating
value. Clear to use default rating value.
8. Set to show a Near End of Life result. Clear to
show only Good and Bad battery result.
9. “Default CCA” Value.
10. Set to show health of Reserve Capacity on
Group 31 Standard/Flooded Batteries
11. Check to enable sending data to other
services.
12. Choose language for tester.
13. Wi-Fi Setup.
14. Date and Time Setup.
15. Advance Setup
16. Select print device.
1
2
3
5
4
12
11
10
9
8
7
6
13
14
15
16
To access, from home
screen touch settings
Note: Some Private Label Testers will
have some settings locked to comply with
company standards.
