Installation Manual
–
200E Series
Page 3
As such, the RP can easily be
retrofitted.
The RP also supports one IP-camera to
be installed on the network.
Ethernet Switch
The Ethernet switch is not necessary if
only one DCU 210E and one RP
210E/220E is in use. These can then
be wired with an Ethernet cable
directly.
It is recommended to make use of an
Ethernet switch though, as it simplifies
PC configuration connection and
future expansion to remote panels
and/or camera interface.
Note! For redundant Ethernet
connection,
managed
Ethernet
switches must be used.
Expansion
The basic system can be expanded
with more input and output channels
using the versatile RIO units (Remote
I/O).
Currently, there are RIO units for
I/O expansion, RIO 410 and RIO
210.
Exhaust temperature
monitoring, RIO 412
Generator monitoring, RIO 425
Load sharing, LSU 408
