2.2 Package contents
Autarco OX series inverter
Mounting bracket
+ screws
Group 1: 18 x MC4
connector pairs
(S4.MC4F/MC4M)
Group 2: 20 x MC4
connector pairs
(S4.MC4F/MC4M)
Instruction manual
2.3 Internal DC switch
Please verify whether your Autarco OX series inverter is equipped with internal DC switches. This
switch can be found on the bottom of the inverter. If there isn’t an internal DC switch it is
important to apply an external DC switch in order to completely disconnect the solar PV module
strings from the inverter.
2.4 Explanations of symbols on inverter
10min
DANGER - HIGH ELECTRIC VOLTAGE
This device is directly connected to public grid. All work to the inverter
shall be carried out by qualified personnel only. There might be residual
currents in inverter for up to 10 minutes because of large capacitors.
ATTENTION
This device is directly connected to electricity DC generators and the
public AC grid.
DANGER – HOT SURFACES
The components inside the inverter will get hot during operation, DO
NOT touch aluminum housing during operating.
ATTENTION
In case of any work to the inverter, always refer to this manual for
detailed product information.
8
OX-series Inverters
