Installation and operation manual
Special Settings
Special settings can switch off functions temporarily for testing purposes. These
tests should only be done by qualified Autarco personnel or trained installers
when requested to do so. Submenu includes:
1. Grid Filter Set
2. Relay_Protect Set
3. ILeak_Protect Set
4. GROUND_Protect Set
5. GRID INTF.02 Set
6. MPPT Parallel Mode
7. Cnst. Voltage Mode
8.
V/FRT Set
9. IgZero_COMP. Set
10. PI Set
11. IgADCheckPRO Set
12. NoSmallPulse Set
13. VarCompensation
14. AFCI Set
STD Mode Settings
STD Mode Settings are used when demand response is required by grid
operators.
1. Working Mode Set
2. Power Rate Limit
3. Freq Derate Set
4. 10mins Voltage Set
5. Power Priority
6. Initial Settings
7. Voltage PCC Set
Restore Settings
Restore Settings resets the inverter to factory defaults.
HMI Updater
Selecting HMI Updater will show the current software version the LCD screen is
based on.
Internal EPM Set
Internal power export management.
1. Mode
2. Backflow power
3. Fail safe ON/OFF
External EPM Set
External power export management.
1. 5G-EPM
2. Others-EPM
Restart
HMI
This function is used to restart
the HMI software.
Debug parameter
Shows debug parameters.
Fan test
Test intelligent fan
DSP Update
Selecting DSP Update will show the current internal software version.
Compensation Set
This function is used to calibrate inverter output energy. It will not impact the
energy count for inverter with RGM.
1. Power parameter
2. Voltage parameter
Using this function without previous approval from Autarco will
void any existing kWh Guarantees.
M-S2-OX-EN-V2.4
37
