EN
8
Mounting the Unit
1. Clean and dry thoroughly the windshield area where you want to mount
the unit.
Note:
Dirty and moist glass will cause the mounting bracket can not be firmly
mounted on the windshield.
3. To remove the memory card, push to eject memory card out of the slot.
Note:
- Make sure the memory card has been formatted before the initial using.
- Do not remove the memory card during recording. The unit will auto
power off after you removing the memory card, please press power on/off
button to turn on.
- When operating in the Recording Mode, press to stop recording.
- You have to insert a memory card into the unit firstly before connecting
the unit to the power supply.
- To avoid the loss of data caused by improper use, it is recommended to
back up the data pre-saved in SD card to a computer or other storage
device before formatting.
Windshield
FCWS/LDWS calibration
Card volum
Driving time warning
Format
