AURATON R30 RT, Руководство пользователя

Страница: 9 / 32

9
Fastening the temperature regulator to the wall
NOTE: If the wall is wooden, there is no need to use wall plugs. In such a case, drill two
holes 2.7 mm in diameter instead of 6 mm, and screw the screws directly into the wood.
1. Drill two holes 6 mm in diameter in the wall (use the template attached to the manual
to mark the spacing between these holes).
2. Insert plastic wall plugs (included in the kit).
3. Screw in the left screw with a 3 mm clearance.
4. Put the regulator over the screw head and slide it to the left (pay attention to the
key-hole in the rear wall of the regulator).
5. Screw in the right screw, making sure it holds the regulator securely.