AURATON R30 RT, Руководство пользователя

Страница: 19 / 32

19
Anti-freeze mode
Switching off the receiver for a period of time
Viewing the currently active program
Relay operating time counter
The AURATON R30 RT regulator is equipped with a setpoint for the anti-freeze tem-
perature. This setpoint can be set within the range from 4 to 10°C. (Factory set at 7°C)
The anti-freeze mode is used during a prolonged period of absence or outside the heat-
ing season and is designed to prevent water in the heating system from freezing
1. To enter the anti-freeze mode, press the button. The “ ” icon will appear on
the display.
2. To leave the anti-freeze mode press the or button.
Pressing the button and holding it for 5 seconds causes switching off the thermo-
stat relay, setting the temperature in the receiver to 4 °C and putting out all elements
on the display except for current temperature, time and day of week.
To restore normal operation of all functions of the regulator, press the
button.
Pressing the button in the normal operation mode causes the segment and
all the parameters of the currently executed program (day of week, temperature and
ending time) to flash for 10 seconds on the display.
To restore the regulator back to normal operation, press the
button again.
Pressing the button and holding it for 3 seconds activates the function
that counts the relay operating time during the last 24 hours.
Pressing the
button again causes the segment to appear, correspond-
ing to the function of counting the accumulated number of days of relay operation
To restore the regulator back to normal operation, press the
button again.
NOTE: To reset the total counter of days of relay operation to zero, press the
button and hold it for 5 seconds, while in the mode.
NOTE: “RESET” causes both operating time counters to be et to zero.